Changing Your Goggles Lens: An Easy Tutorial

Goggles are one of the most important parts of your swimming gear. They protect your eyes from water and debris, so it’s important to keep them clean and replace lenses when necessary. Changing the lens on your goggles is easy. But if you’re not careful, it can also be dangerous! Replacing ray ban lenses is something you can do at home, but it’s important to be safe. Here’s how you can replace the lens on your goggles safely.

How to change goggles lens

As long as you’re careful and patient, changing the lenses on your goggles is simple!

Clean the goggles

Use a soft cloth to wipe the lenses. If you have them, use microfiber cloths to clean your goggles. If not, regular clothes are fine too. The idea here is to be gentle, so you don’t scratch your lens or affect its ability to repel water. You can also use soap and water if you want (which will help with fogging), but be careful not to get any in your eyes while cleaning. Otherwise, the soap might irritate them!

Be aware that there may still be some residue on the inside of your lens when it’s time for another pair of ray bans lens changes.

Pop open the latch

You’ll need to push down a small button on the bottom of your goggles with your thumb to open the latch. You can tell if it’s open by looking for a little triangle shape where the button is. To close the latch, simply press it down again until you hear (or feel) a reassuring click! If you’re having trouble opening or closing the lens of your goggles, try using both hands. One to hold back any hair from blocking access to the latch and another to push down on it. It may take some practice before getting this technique down pat!

Remove the old lens

With the old lens in your hand, you’re ready to remove it. You want to make sure that you clean and dry the goggles before taking off your old lens. If there is any moisture left on the goggles, it can cause damage to your new lens. Use a soft towel or cloth (preferably non-abrasive) and wipe away all the water or condensation that may have built up on the goggles. Be careful not to scratch them as you remove any dirt or grime!

Install the new lens

Now that you have the new lens, it’s time to install it. The steps are the same as when you removed your old lenses, so follow them carefully. Ensure both sides of the lens are clean and free of debris or dust particles before installing. Next, check that each side is securely seated in its respective frame (you don’t want to end up with crooked goggles). Finally, use a soft cloth or paper towel to wipe down any fingerprints left behind by handling both sides of the lens with care.

Test it out

After changing the lens, you should test it out in the pool to ensure it fits your face and works as intended. If swimming in open water or training for a triathlon, try wearing the new lens in that environment. If it’s raining or hailing outside and you normally wear goggles, go ahead and use them during a workout in those conditions.

Conclusion

Now that you know how to change your goggles lenses, you can do it whenever you need to. This simple process will save you time and money by not having to buy new goggles or visit a doctor or optometrist every time the lens gets scratched up. Take care when handling the lens itself because it can get damaged easily; if there are cracks or scratches in the glass, don’t try replacing it!