Common Problems With Central Heating Systems

If your central heating system has stopped working, it might be time to talk to a professional. These systems rely on mechanical parts, and as such, problems can occur with them. Some problems can be easily sorted with some light DIY but for anything that can’t be figured out, contacting a professional gas engineer is the best option.

Common problems with central heating systems are leaking pipes, dirty filters, or mechanical issues. The first and most obvious problem is heat loss. If you notice that your heating system is only partially heating your home, it’s probably a sign of a problem. If this happens, you can fix the leaking pipes by tightening them slightly. If the leaking pipes are the source of the problem, you should contact a professional.

Image credit

If you notice that the radiators are cold at the top but warm at the bottom then it’s usually an easy fix that simply involves bleeding the radiators with a radiator key. If you don’t have a radiator key, you can buy one at any hardware store. Radiators might also need bleeding if you notice banging noises coming from the radiators which could be a sign of air in the system.

Another common problem with central heating systems is low pressure. When the pressure is low, the system doesn’t heat the home as well as it should. You should first check the valves to make sure that the gas is running properly. If you can’t figure out the cause of the lack of heating, a professional can help you diagnose and resolve the problem. For an Emergency Plumber Cheltenham, visit a site like

Another common problem with central heating systems is improper air flow. It causes uneven circulation throughout the home and results in a decreased level of warmth. In addition to airflow, the temperature of the air coming out of the vents can be affected by a clogged or dirty filter. If the filter is permanently discoloured, it’s time to replace it. It’s best to check the ducts regularly because they can leak and cause a problem with your central heating system.

Image credit

In addition to leaks, the system may have dirty air filters. Those filters can cause your heater or heat exchanger to malfunction. The ducts can also be too small. A dirty filter can restrict airflow and cause your equipment to malfunction. The filter can block the heat exchanger if they cannot move enough air through the system. When a dirty air filter restricts airflow, it may not be able to perform its function.

If your central heating makes a creaking or ticking noise, it could be that the pipes have been too tightly fixed to the walls or floors. The fix is to loosen the pipe joints which might involve drilling bigger holes in the floor joists, for example.